This high-grade brass stock sheet is specifically designed for robust hydraulic systems. Its substantial thickness and dimensions ensure exceptional durability and reliable fluid handling under pressure.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.821" |
| Length | 46" |
| Width | 41" |
Engineered for reliability and performance, this 0.821" thick brass stock sheet offers superior corrosion resistance and mechanical strength essential for hydraulic applications. The alloy composition provides excellent machinability for custom component fabrication and brazing capabilities. Its dimensions of 46" in length and 41" in width allow for efficient cutting and integration into a wide range of hydraulic manifold and component designs. This material is ideal for environments where fluid compatibility and long-term operational integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Precisely cut the brass stock to the required component dimensions using appropriate tooling. 3. Perform any necessary machining or joining operations (e.g., drilling, tapping, brazing) following industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade material for critical hydraulic components. | Always select brass stock that meets or exceeds the specified thickness and material grade for the intended hydraulic pressure and fluid type. |
| Improper cutting or machining leading to burrs or compromised structural integrity. | Utilize sharp, appropriate cutting and machining tools, and deburr edges meticulously to prevent leaks or material fatigue. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Hydraulic Valve Components, Custom Hydraulic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||