Engineered for rigorous pressure and temperature control, this 0.810" thick Nylon stock sheet offers exceptional durability and wear resistance. Its robust material properties make it ideal for demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.810" |
| Length | 30" |
| Width | 16" |
Trusted by engineers across multiple sectors, this Nylon stock sheet boasts a precise thickness of 0.810 inches, a length of 30 inches, and a width of 16 inches. Manufactured from high-grade Nylon, it exhibits excellent mechanical strength, superior abrasion resistance, and a broad operating temperature range, making it suitable for high-pressure fluid handling systems, valve seats, bearings, and wear pads in extreme conditions. Its inherent chemical resistance further enhances its versatility in corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully machine the Nylon stock to the required dimensions and tolerances. 3. Securely fasten the component using appropriate fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks or premature wear. | Thoroughly clean and deburr all mating surfaces before installation. |
| Over-tightening fasteners, causing stress concentrations and potential material failure. | Use a torque wrench and follow recommended torque specifications for Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure hydraulic and pneumatic systems, Wear components in pumps and valves, Sealing elements in high-temperature environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||