This substantial brass stock sheet, precisely engineered to 0.798" thickness, offers exceptional strength and corrosion resistance. Ideal for heavy-duty pulling and lifting applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.798" |
| Length | 45" |
| Width | 20" |
Engineered for reliability and performance, this brass stock sheet boasts a significant thickness of 0.798 inches, a generous length of 45 inches, and a width of 20 inches. Composed of high-grade brass, it exhibits excellent tensile strength and resistance to fatigue and environmental degradation. Its non-sparking properties are critical for use in hazardous environments, and its inherent lubricity facilitates smooth operation in sliding or friction-based pulling and lifting mechanisms. This material is meticulously specified for applications demanding sustained structural integrity under load and exposure to corrosive elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and drill mounting holes according to design specifications. 3. Securely fasten the brass stock sheet using appropriate high-strength fasteners, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners. | Always utilize fasteners rated for the anticipated load and compatible with brass to prevent galvanic corrosion. |
| Over-tightening fasteners, causing deformation. | Employ a torque wrench set to the manufacturer's recommended specification to avoid stressing the material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated lifting lugs and brackets, Reinforcement plates for heavy-duty pulleys, Wear-resistant sliding components in winch systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||