This 0.788" thick Nylon stock sheet offers exceptional mechanical strength and thermal stability, making it ideal for robust components in heating and cooling systems.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.788" |
| Length | 32" |
| Width | 14" |
Specified by design engineers worldwide, this premium Nylon stock sheet measures 0.788 inches in thickness, 32 inches in length, and 14 inches in width. Engineered for exceptional wear resistance, high tensile strength, and excellent chemical inertness, it reliably performs in demanding thermal environments. Its inherent lubricity and low coefficient of friction reduce wear in moving parts. Ideal for fabricating seals, bearings, structural components, and insulation in HVAC and industrial heating/cooling equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces thoroughly to ensure proper adhesion or mating. 2. Carefully cut the Nylon sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten or integrate the fabricated component into the heating or cooling system, verifying fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting technique leading to delamination or uneven edges. | Utilize sharp, industrial-grade cutting blades specifically designed for plastics and maintain a consistent feed rate to achieve clean, precise cuts. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ appropriate torque settings and consider the use of washers to distribute load evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC System Components, Industrial Heat Exchangers, Thermal Insulation Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||