This robust carbon steel stock sheet, precisely machined to 0.781" thickness, is engineered for critical pressure and temperature control systems. Its substantial dimensions offer a reliable component for robust fabrication.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 25" |
| Width | 45" |
Built to exacting engineering tolerances, this 0.781" thick carbon steel stock sheet measures 25" in length and 45" in width, providing a substantial and dimensionally stable component. Its inherent strength and moderate temperature resistance make it ideal for applications involving moderate pressure and temperature fluctuations within industrial systems. The material's workability allows for precise machining and integration into complex assemblies. Suitable for a wide range of structural and containment duties where consistent performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended service environment and temperature/pressure ratings. 2. Ensure mating surfaces are clean, free of debris, and properly prepared for joining (e.g., welding, bolting). 3. Accurately position the stock sheet according to design specifications, ensuring proper alignment and fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for carbon steel, leading to brittle welds. | Employ pre-heating and post-heating techniques as recommended for the specific carbon steel grade and thickness to prevent hydrogen embrittlement and ensure weld integrity. |
| Failure to account for thermal expansion and contraction in design. | Incorporate expansion joints or flexible connections in the system design to accommodate material movement under varying temperatures, preventing stress concentrations. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, Heat exchanger components, Industrial piping and manifolds, Temperature regulation systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||