This 0.781-inch thick carbon steel stock sheet offers exceptional strength and durability, ideal for fabricating critical hydraulic components. Precisely manufactured for demanding industrial applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 34" |
| Width | 35" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a substantial 0.781-inch thickness, ensuring superior structural integrity for high-pressure hydraulic systems. Its dimensions of 34 inches in length and 35 inches in width provide ample material for custom fabrication of robust hydraulic manifolds, accumulator housings, and other vital components. The inherent strength and wear resistance of carbon steel make it an optimal choice where reliability and longevity are paramount, resisting deformation and fatigue under extreme operational loads. Verified material properties ensure consistent performance in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping equipment is calibrated for precise dimensions. 2. Weld or fasten the formed carbon steel components according to hydraulic system design specifications. 3. Conduct thorough pressure testing and leak detection before integrating into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for high-pressure hydraulic components. | Always specify and verify carbon steel stock sheets with material certifications suitable for the intended pressure and operational demands. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean the carbon steel surface to remove all mill scale, rust, and contaminants to ensure strong weld integrity and proper coating adhesion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Accumulator Housing Construction, Heavy Equipment Hydraulic Component Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||