This heavy-gauge carbon steel stock sheet offers exceptional strength and durability for demanding plumbing and janitorial environments. Its substantial thickness ensures superior load-bearing capacity and resistance to impact.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.780" |
| Length | 47" |
| Width | 43" |
Precision-manufactured to tight tolerances, this 0.780-inch thick carbon steel stock sheet measures 47 inches in length and 43 inches in width. Composed of high-grade carbon steel, it exhibits excellent tensile strength, rigidity, and resistance to deformation under significant stress. The material's inherent toughness makes it ideal for fabricating custom brackets, supports, and protective barriers in industrial plumbing systems, heavy-duty janitorial stations, and areas requiring robust structural reinforcement.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from contaminants. 2. Accurately measure and mark the desired cut lines on the carbon steel sheet. 3. Utilize appropriate cutting tools (e.g., plasma cutter, heavy-duty shears) to achieve precise dimensions. 4. Securely fasten the fabricated component using suitable hardware and welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to imprecise edges and potential material stress. | Employ industrial-grade cutting equipment designed for thick carbon steel to ensure clean, accurate cuts and maintain material integrity. |
| Improper surface preparation before installation, compromising adhesion or weld quality. | Thoroughly degrease and remove any rust or debris from both the sheet and the mounting surface prior to attachment. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom heavy-duty support fabrication for plumbing infrastructure, Reinforcement plating for industrial janitorial equipment, Protective barriers and enclosures in high-traffic areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||