This 0.778-inch thick 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength, making it a superior choice for critical pressure and temperature control systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.778" |
| Length | 14" |
| Width | 40" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a substantial 0.778" thickness, a precise 14" width, and a generous 40" length. Engineered from Austenitic 304 stainless steel, it exhibits excellent resistance to a wide range of corrosive media and elevated temperatures, maintaining structural integrity in demanding environments. Its material composition ensures non-magnetic properties and good weldability. This sheet is specifically suited for fabricating components in high-pressure vessels, heat exchangers, and specialized industrial piping where thermal cycling and chemical exposure are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and forming tools are calibrated and suitable for the material thickness. 2. Precisely cut the 0.778" sheet to the required dimensions using appropriate cutting methods (e.g., waterjet, plasma, or precision sawing). 3. Deburr all cut edges thoroughly to remove any sharp points or burrs that could compromise subsequent assembly or integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Utilize dedicated stainless steel cutting tools and maintain strict segregation from carbon steel to prevent cross-contamination. |
| Insufficiently preparing edges after cutting, leading to stress risers or poor weld penetration. | Employ proper edge preparation techniques, including beveling if required for welding, and ensure a clean, smooth surface finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||