This heavy-duty carbon steel stock sheet is engineered for demanding hydraulic applications. Its substantial 0.775" thickness ensures exceptional strength and longevity in critical fluid power systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.775" |
| Length | 40" |
| Width | 39" |
A proven choice for industrial professionals, this carbon steel stock sheet offers superior performance in high-pressure hydraulic environments. Measuring 0.775 inches in thickness, 40 inches in length, and 39 inches in width, it provides ample material for fabricating robust hydraulic manifolds, cylinder components, and structural supports. Its inherent strength and durability make it resistant to deformation under extreme loads and thermal cycling, ensuring reliable operation and extended service life for your hydraulic systems. This material is chosen for its excellent machinability and weldability, allowing for precise component manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the surface where the sheet will be used, ensuring no contaminants are present. 2. Precisely cut the sheet to the required dimensions for your hydraulic component using appropriate cutting tools. 3. Securely fasten or weld the fabricated component according to the specific design and operational requirements of the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or thinner steel for high-pressure hydraulic applications. | Always select a steel grade and thickness that meets or exceeds the calculated pressure and stress requirements of the hydraulic system. |
| Inadequate surface preparation before fabrication or installation. | Ensure all surfaces are clean, free from rust, scale, and grease to prevent premature corrosion and ensure proper adhesion or weld integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Heavy-Duty Cylinder Components, Structural Supports for Hydraulic Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||