This 0.769-inch thick brass stock sheet, measuring 36 inches by 25 inches, is engineered for demanding hydraulic applications. Its premium brass composition ensures exceptional durability and resistance to corrosive fluids, making it an ideal choice for critical components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.769" |
| Length | 36" |
| Width | 25" |
Built to exacting engineering tolerances, this brass stock sheet is designed for optimal performance in hydraulic systems. With a precise thickness of 0.769 inches, a length of 36 inches, and a width of 25 inches, it provides ample material for complex component fabrication. The inherent properties of brass, including excellent corrosion resistance, good machinability, and non-sparking characteristics, make it suitable for a wide range of hydraulic manifold and fitting applications. Its dimensional stability ensures consistent fit and function within high-pressure environments, reducing the risk of leaks and premature failure. This material's ductility allows for intricate shaping without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of debris before fabrication. 2. Precisely machine the sheet according to hydraulic system design specifications. 3. Verify all dimensions and tolerances before integration into the hydraulic assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for specific hydraulic fluid compatibility. | Always verify the brass alloy's compatibility with the intended hydraulic fluid to prevent premature corrosion or degradation. |
| Inadequate deburring after machining, leading to potential particle contamination in the hydraulic system. | Thoroughly deburr all machined edges to prevent particulate matter from entering the fluid system. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Hydraulic Fittings and Adapters, Valve Components for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||