This robust carbon steel stock sheet, measuring 0.767 inches thick, 47 inches long, and 25 inches wide, is specifically designed for critical hydraulic system components. It offers superior structural integrity and pressure resistance.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.767" |
| Length | 47" |
| Width | 25" |
Engineered for reliability and performance, this 0.767" thick carbon steel stock sheet is manufactured to exacting standards for hydraulic applications. Its substantial 47" x 25" dimensions provide ample material for fabrication of robust hydraulic manifolds, pressure vessels, and structural supports. The carbon steel composition ensures high tensile strength, excellent machinability, and resistance to common hydraulic fluids and operating pressures. This material is chosen for its predictable performance under stress and its cost-effectiveness in high-volume production environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish for conformity to design specifications. 2. Prepare edges for welding or machining according to fabrication drawings. 3. Integrate into hydraulic system assembly following established engineering protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel not rated for pressure applications. | Always confirm the carbon steel grade meets the required pressure and operational environment specifications for hydraulic systems. |
| Inadequate edge preparation leading to weld defects. | Ensure proper beveling and cleaning of edges prior to welding to achieve full penetration and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pressure Vessel Construction, Heavy Equipment Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||