This 0.765" thick Nylon stock sheet, measuring 41" x 14", is engineered for demanding hydraulic environments. Its robust material properties ensure longevity and reliable performance under extreme conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.765" |
| Length | 41" |
| Width | 14" |
Purpose-built for heavy-duty applications, this Nylon stock sheet exhibits exceptional mechanical strength, high abrasion resistance, and excellent impact absorption. Its 0.765" thickness provides substantial structural integrity for components within hydraulic systems, while the 41" x 14" dimensions offer ample material for fabrication of custom parts such as seals, wear pads, and manifold components. Nylon's inherent lubricity reduces friction, contributing to system efficiency and extended component life in high-pressure and dynamic operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling. 3. Smooth all cut edges to prevent stress risers and improve sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized pieces, leading to premature wear. | Always account for necessary clearances and stress distribution when cutting. |
| Not deburring edges, causing seal damage. | Thoroughly deburr all cut edges to ensure a smooth mating surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Wear rings and guide bands, Seals and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||