This robust brass stock sheet, precisely 0.761" thick, 16" in length, and 16" in width, is engineered for demanding pressure and temperature control systems. Its inherent material properties ensure reliable performance and longevity.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.761" |
| Length | 16" |
| Width | 16" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.761 inches, with precise dimensions of 16 inches by 16 inches. Composed of high-grade brass, it exhibits excellent thermal conductivity, corrosion resistance, and mechanical strength, making it ideal for components in pressure regulation valves, heat exchangers, and temperature sensing devices. The material's malleability allows for intricate shaping while maintaining structural integrity under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to cutting. 2. Precisely cut the brass sheet to the required component dimensions using appropriate tooling. 3. Smooth all cut edges to prevent stress concentrations and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or deformation. | Employ sharp, carbide-tipped blades or waterjet cutting for clean, precise cuts without material distortion. |
| Ignoring material compatibility with surrounding components. | Consult material data sheets to ensure brass is compatible with other metals and fluids in the system to prevent galvanic corrosion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulating valve components, Heat exchanger plates, Temperature sensor housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||