This robust 0.760" thick brass stock sheet, measuring 45" x 22", is engineered for superior performance in hydraulic systems. Its exceptional corrosion resistance and excellent machinability make it ideal for critical components.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.760" |
| Length | 45" |
| Width | 22" |
Trusted by engineers across multiple sectors, this 0.760" brass stock sheet (45" x 22") offers superior strength, excellent corrosion resistance against a wide range of hydraulic fluids, and superior machinability for precise component fabrication. Its high thermal conductivity aids in heat dissipation within hydraulic systems, while its non-sparking properties make it suitable for hazardous environments. This material is ideal for fabricating manifolds, valve bodies, and specialized fittings where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the working area is clean and free from debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools (e.g., bandsaw, waterjet). 3. Deburr all cut edges to prevent potential fluid contamination and ensure smooth assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, resulting in rough edges and potential material stress. | Utilize sharp, high-quality cutting tools designed for brass and maintain them regularly for clean, precise cuts. |
| Improper storage leading to oxidation or physical damage. | Store the brass stock sheet flat in a dry, protected environment, ideally on a non-abrasive surface, to prevent scratching and corrosion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifolds, Valve Bodies, Custom Hydraulic Fittings, Sealing Surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||