This high-performance 0.759-inch thick polycarbonate sheet, measuring 16" x 46", is specifically engineered for demanding hydraulic system applications where impact resistance and clarity are paramount.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.759" |
| Length | 16" |
| Width | 46" |
Engineered for reliability and performance, this 0.759-inch thick polycarbonate stock sheet boasts exceptional impact strength and optical clarity, making it ideal for critical hydraulic manifold and sight glass applications. Its robust molecular structure provides excellent resistance to a wide range of hydraulic fluids and pressures, ensuring longevity and preventing catastrophic failure. The generous 16" x 46" dimensions offer ample material for fabricating complex components. Polycarbonate's inherent toughness also allows for precise machining and shaping without compromising structural integrity, a key requirement in high-pressure hydraulic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces of the hydraulic component and the polycarbonate sheet to remove any debris or contaminants. 2. Apply a suitable, chemically compatible sealant or gasket material to the perimeter of the mounting area. 3. Carefully position the polycarbonate sheet and secure it using appropriately sized fasteners and torque specifications, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible sealants or adhesives that can degrade polycarbonate. | Always consult the material safety data sheet (MSDS) for both the polycarbonate and the sealant/adhesive to ensure chemical compatibility. Test in a small, inconspicuous area if unsure. |
| Over-tightening fasteners, which can lead to stress cracking or deformation of the sheet. | Utilize torque wrenches and follow recommended torque values for the specific fastener size and material. Consider using washers to distribute pressure. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic Manifold Fabrication, Sight Glasses and Level Indicators, Protective Shields for Hydraulic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||