This robust 304 stainless steel stock sheet provides exceptional strength and corrosion resistance for demanding pulling and lifting applications. Its substantial 0.759" thickness ensures durability in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.759" |
| Length | 46" |
| Width | 29" |
Precision-manufactured to tight tolerances, this 0.759" thick, 46" long, and 29" wide 304 stainless steel stock sheet is engineered for critical pulling and lifting operations. The inherent properties of 304 stainless steel, including its excellent tensile strength, resistance to pitting and crevice corrosion, and non-magnetic nature, make it an optimal material choice for applications exposed to moisture, chemicals, or marine environments. This sheet is ideal for fabricating custom lifting lugs, winch bases, support structures, and reinforcement plates where structural integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and capable of supporting the intended load. 2. Position the stock sheet according to the design specifications, verifying alignment. 3. Secure the stock sheet using appropriate high-strength fasteners and welding techniques, adhering to industry standards for pulling and lifting equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or inadequate welding procedures. | Always utilize fasteners and welding techniques rated for the maximum anticipated load as specified by engineering calculations and relevant safety standards. |
| Failing to account for environmental exposure in material selection. | Confirm that the 304 stainless steel is suitable for the specific corrosive elements present in the operating environment to prevent premature degradation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom lifting fixture fabrication, Heavy-duty winch and hoist mounting, Reinforcement plates for structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||