This high-grade carbon steel stock sheet is engineered for demanding hydraulic applications. Its substantial 0.755" thickness and precise dimensions provide exceptional structural integrity and durability for critical fluid power systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.755" |
| Length | 36" |
| Width | 47" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a thickness of 0.755 inches, a length of 36 inches, and a width of 47 inches. Manufactured from high-strength carbon steel, it exhibits excellent tensile strength and yield point, crucial for withstanding high pressures and mechanical stresses inherent in hydraulic systems. Its consistent material properties ensure predictable behavior and longevity, making it ideal for fabricated hydraulic manifold blocks, pressure vessels, and structural components within hydraulic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to fabrication. 2. Utilize appropriate cutting and machining techniques for carbon steel. 3. Ensure all fabricated components meet design specifications for hydraulic pressure and flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade steel for high-pressure hydraulic components. | Always select carbon steel stock sheets with specifications exceeding the calculated operational pressures and mechanical loads. |
| Inadequate surface preparation before welding or assembly, leading to corrosion or weak joints. | Thoroughly clean all surfaces of oil, grease, and mill scale before welding or joining to ensure optimal bond strength and corrosion resistance. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Hydraulic Pressure Vessels, Structural Components for Hydraulic Presses.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||