Engineered for demanding pressure and temperature control systems, this substantial brass stock sheet offers exceptional durability and reliability. Its precise dimensions and inherent material properties ensure optimal performance in critical industrial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.752" |
| Length | 20" |
| Width | 32" |
A proven choice for industrial professionals, this brass stock sheet boasts a thickness of 0.752 inches, a length of 20 inches, and a width of 32 inches. Fabricated from high-quality brass, it exhibits excellent machinability, good corrosion resistance, and superior thermal conductivity, making it ideal for components subjected to moderate pressure and temperature fluctuations. The substantial gauge ensures structural integrity and longevity in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and mark the desired cut dimensions on the brass sheet. 3. Utilize appropriate cutting tools (e.g., abrasive chop saw, waterjet cutter) for precise fabrication. 4. Deburr all cut edges to prevent sharp points and ensure smooth operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or imprecise edges. | Employ precision cutting equipment and always deburr edges thoroughly after fabrication. |
| Overlooking the need for surface preparation before installation. | Thoroughly clean and prepare the mounting surface to ensure a secure and reliable fit. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel components, Temperature regulation manifolds, Heat exchanger plates, High-pressure fluid fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||