This robust brass stock sheet is engineered for extreme operational demands within pulling and lifting sectors. Its substantial thickness and high-quality brass composition ensure exceptional durability and reliability under significant stress.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.746" |
| Length | 18" |
| Width | 24" |
Purpose-built for heavy-duty applications, this brass stock sheet features precise dimensions of 0.746 inches in thickness, 18 inches in width, and 24 inches in length. Constructed from high-grade brass, it exhibits superior tensile strength and excellent resistance to corrosion and wear, making it an ideal material for components subjected to constant friction and load bearing. Its inherent non-sparking properties further enhance safety in potentially hazardous environments. This sheet is meticulously manufactured to meet stringent industrial standards for performance and longevity, ensuring consistent results in demanding pulling and lifting operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate heavy-duty fasteners, ensuring even torque distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for heavy loads. | Utilize high-tensile strength fasteners specifically designed for load-bearing applications to ensure structural integrity. |
| Improper surface preparation leading to uneven installation. | Thoroughly clean and level the mounting surface before installation to guarantee a flush and secure fit, preventing stress points. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for heavy-duty pulleys, Wear pads in lifting equipment guides, Custom fabricated components for winch systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||