This robust brass stock sheet is engineered for exceptional performance in high-pressure hydraulic systems. Its precise dimensions and superior material composition ensure reliability and longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.738" |
| Length | 23" |
| Width | 20" |
Purpose-built for heavy-duty applications, this 0.738-inch thick brass stock sheet measures 23 inches in length and 20 inches in width, delivering substantial material for complex hydraulic components. Composed of a high-copper alloy, it exhibits excellent machinability, superior corrosion resistance against a wide range of hydraulic fluids, and robust mechanical strength essential for withstanding extreme pressures and thermal cycling. This material is ideal for fabricating critical hydraulic manifolds, valve bodies, and structural supports within demanding industrial and mobile equipment, guaranteeing operational integrity and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut and machine to required component dimensions. 3. Integrate into the hydraulic assembly, adhering to all system sealing and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner gauge brass for high-pressure applications. | Always select brass stock sheet with sufficient thickness to withstand the operational pressure and mechanical stresses of the specific hydraulic system. |
| Improper surface preparation before machining or assembly. | Thoroughly clean and degrease all surfaces to prevent contamination that could compromise sealing or lead to premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Valve Bodies and Housings, Hydraulic System Structural Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||