This robust 0.737-inch thick 304 stainless steel stock sheet, measuring 44 inches by 26 inches, is engineered for superior performance and longevity in hydraulic systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.737" |
| Length | 44" |
| Width | 26" |
Trusted by engineers across multiple sectors, this 0.737" thick 304 stainless steel stock sheet (44" x 26") offers exceptional corrosion resistance and mechanical strength vital for hydraulic applications. Fabricated from annealed AISI 304 stainless steel, it exhibits excellent weldability and formability, crucial for custom manifold construction and system components. Its inherent passivity layer ensures protection against a wide range of hydraulic fluids and environmental contaminants, maintaining integrity under high-pressure conditions and extending service life. This material is specified for applications requiring reliable performance and minimal maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants before cutting or fabrication. 2. Utilize appropriate cutting and forming tools designed for stainless steel to maintain material integrity. 3. For welded assemblies, follow industry-standard practices for 304 stainless steel welding to ensure leak-proof joints.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tooling which can lead to iron contamination and premature corrosion. | Employ dedicated stainless steel cutting and fabrication equipment to prevent cross-contamination. |
| Improper welding techniques leading to carbide precipitation and reduced corrosion resistance. | Utilize low-carbon 304L or employ proper post-weld heat treatment procedures if standard 304 is welded. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, High-Pressure Fluid Connectors, Corrosive Fluid Containment Vessels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||