This robust brass stock sheet is engineered for demanding pressure and temperature control systems. Its superior material properties ensure reliable performance and longevity in critical industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.731" |
| Length | 35" |
| Width | 40" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.731 inches, with precise dimensions of 35 inches in length and 40 inches in width. Composed of a high-copper alloy (typically C36000 free-machining brass or equivalent), it offers excellent machinability, good corrosion resistance, and moderate strength. This composition makes it ideal for components subjected to fluctuating pressures and temperatures, such as heat exchanger plates, valve bodies, and regulator diaphragms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of contaminants. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or joining methods as dictated by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade brass with insufficient corrosion resistance for the intended environment. | Verify the brass alloy grade meets the specific chemical and thermal demands of the application before selection. |
| Inadequate support leading to deformation under pressure or temperature stress. | Ensure the supporting structure provides sufficient rigidity and load-bearing capacity for the operational stresses. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Components, Pressure Vessel Linings, Regulator Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||