This high-performance nylon stock sheet, precisely machined to 0.730" thickness, offers exceptional durability and low friction for critical hydraulic components. Its robust nature ensures reliable operation in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.730" |
| Length | 38" |
| Width | 22" |
Manufactured under strict quality controls, this 0.730" thick nylon stock sheet provides a superior combination of mechanical strength, excellent wear resistance, and low coefficient of friction crucial for hydraulic systems. Its high impact strength and chemical inertness make it ideal for seals, wear pads, and custom-machined hydraulic components. The 38" length and 22" width allow for efficient utilization in a variety of manufacturing processes, ensuring consistent performance and extended service life in demanding fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully machine the nylon stock sheet to the required dimensions and tolerances. 3. Apply appropriate lubricants if necessary and install the component, ensuring proper fit and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners on nylon components, leading to deformation or cracking. | Utilize torque wrenches set to manufacturer specifications or recommended torque values for nylon materials. Use appropriate washers to distribute load. |
| Exposing nylon components to excessive UV radiation or specific harsh chemicals without proper consideration. | Consult the material's chemical resistance chart and consider UV-stabilized grades or protective coatings if the application involves prolonged exposure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components (e.g., wear rings, piston seals), Manifold blocks and valve components, Custom-machined hydraulic fittings and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||