This high-grade carbon steel stock sheet is engineered for demanding pressure and temperature control systems. Its robust construction ensures reliability and precise performance in critical industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.722" |
| Length | 48" |
| Width | 33" |
Manufactured under strict quality controls, this 0.722" thick carbon steel stock sheet measures 48" in length and 33" in width. The material's inherent strength and thermal conductivity make it ideal for applications requiring high mechanical integrity and efficient heat transfer. Its precise dimensions facilitate seamless integration into complex assemblies and fabrication processes for pressure vessels, heat exchangers, and control manifolds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare mounting surfaces for optimal contact and sealing. 3. Securely fasten the sheet according to system design parameters, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong gauge for high-pressure applications. | Always select sheet thickness that meets or exceeds the calculated pressure requirements and relevant industry standards. |
| Inadequate surface preparation leading to leaks. | Ensure all mating surfaces are clean, flat, and free of debris or imperfections before installation to guarantee a proper seal. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel construction, Heat exchanger fabrication, Temperature regulation components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||