This robust carbon steel stock sheet, precisely engineered at 0.720" thickness, 43" length, and 12" width, is designed for high-stress pulling and lifting operations, ensuring unparalleled durability and load-bearing capacity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.720" |
| Length | 43" |
| Width | 12" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a substantial 0.720-inch thickness, measuring 43 inches in length and 12 inches in width. Composed of high-grade carbon steel, it offers exceptional tensile strength and yield strength, making it inherently resistant to deformation under extreme loads. Its precise dimensions and material composition ensure consistent performance and reliability in demanding industrial environments, suitable for fabrication into critical components for heavy machinery and infrastructure projects.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the intended application and required mounting points. 2. Securely fasten the stock sheet using appropriate heavy-duty hardware rated for the expected load. 3. Verify proper alignment and structural integrity before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade fasteners. | Always use fasteners with a tensile strength and diameter that exceed the calculated load requirements for the stock sheet. |
| Improperly distributing load across the sheet. | Ensure the load is applied evenly across the intended contact area of the stock sheet to prevent localized stress concentrations and potential failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch and hoist anchor plates, Structural reinforcement for lifting frames, Custom fabrication of industrial towing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||