This robust carbon steel stock sheet is engineered for extreme pulling and lifting operations. Its substantial thickness and dimensions provide exceptional strength and stability for the most challenging industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.718" |
| Length | 28" |
| Width | 38" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet boasts a critical thickness of 0.718 inches, a generous length of 28 inches, and a width of 38 inches. Manufactured from high-grade carbon steel, it offers superior tensile strength and yield strength, ensuring reliable performance under extreme loads. Its robust construction makes it ideal for fabricating heavy-duty winches, anchor points, lifting beams, and structural components within the pulling and lifting sector. The material's inherent durability resists deformation and fracture, guaranteeing operational safety and longevity in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects prior to fabrication. 2. Ensure proper welding procedures are followed for carbon steel of this thickness. 3. Integrate fabricated components securely into the existing lifting or pulling system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade steel for critical structural components. | Always specify and use carbon steel stock sheets that meet or exceed the calculated load requirements and material specifications. |
| Inadequate edge preparation before welding, leading to weak joints. | Properly bevel and clean all edges to be welded to ensure full penetration and a strong, reliable weld. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch bases, Anchor points for pulling equipment, Fabrication of lifting beams and spreaders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||