This robust carbon steel stock sheet is engineered for the most demanding hydraulic applications. Its substantial thickness and high-grade material ensure exceptional strength and reliability under extreme pressure.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.717" |
| Length | 29" |
| Width | 25" |
Purpose-built for heavy-duty applications, this 0.717" thick carbon steel stock sheet (29" x 25") offers superior tensile strength and yield strength crucial for hydraulic system integrity. Its precise dimensions and uniform composition minimize stress concentrations and ensure consistent performance in high-pressure environments. Manufactured from quality carbon steel, it resists deformation and wear, making it ideal for fabricating critical hydraulic components such as manifold blocks, pump housings, and heavy-duty cylinder components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean, dry, and free of contaminants before fitting. 2. Accurately cut or machine the sheet to the required dimensions for component fabrication. 3. Weld or fasten according to the design specifications for the hydraulic system, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge steel for high-pressure hydraulic systems. | Always select steel stock sheet thickness appropriate for the maximum operating pressure and anticipated loads to prevent catastrophic failure. |
| Inadequate surface preparation before machining or welding. | Thoroughly clean the steel surface to remove any mill scale, oil, or debris to ensure optimal weld penetration and dimensional accuracy. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Heavy-Duty Cylinder Construction, Pump and Valve Body Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||