This high-quality carbon steel stock sheet, precisely manufactured to 0.709" thickness, 26" length, and 24" width, is engineered for the rigorous demands of hydraulic applications, ensuring steadfast performance and longevity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.709" |
| Length | 26" |
| Width | 24" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.709" (18mm) thickness, providing exceptional structural integrity for high-pressure hydraulic components. Its 26" x 24" dimensions offer ample material for fabrication of critical hydraulic manifolds, valve blocks, and structural supports. The inherent strength and durability of carbon steel make it resistant to deformation under extreme loads and operating conditions, ensuring consistent fluid containment and system stability. This material is chosen for its weldability and machinability, facilitating precise integration into complex hydraulic assemblies and guaranteeing a robust, long-lasting solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before cutting or machining. 2. Carefully measure and mark dimensions according to design specifications. 3. Utilize appropriate cutting and fabrication techniques for carbon steel, such as plasma cutting or laser cutting, followed by precise machining for component interfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower grade steel that may not withstand hydraulic pressures. | Always specify and verify the use of appropriate carbon steel grades with adequate tensile strength and impact resistance for hydraulic applications. |
| Inadequate surface preparation leading to corrosion or poor weld adhesion. | Thoroughly clean the surface of the steel sheet, removing mill scale, oil, and any other debris prior to welding or assembly. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Heavy-Duty Hydraulic Cylinder Components, High-Pressure Hydraulic System Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||