This robust Nylon stock sheet, at 0.706" thickness, provides superior performance in demanding pressure and temperature control environments. Engineered for longevity and reliability.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.706" |
| Length | 29" |
| Width | 38" |
Manufactured under strict quality controls, this Nylon stock sheet measures 0.706" in thickness, 29" in length, and 38" in width. Nylon's inherent properties, including excellent wear resistance, good tensile strength, and chemical inertness, make it ideal for applications requiring consistent performance under varying pressure and temperature conditions. Its dimensional stability and low coefficient of friction ensure reliable operation in seals, gaskets, and protective components within fluid handling and thermal management systems. This material is also known for its electrical insulation properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove any contaminants. 2. Position the Nylon stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper substrate preparation leading to adhesion failure. | Ensure surfaces are scrupulously clean, dry, and free from grease or debris before installation. |
| Over-tightening fasteners, causing material stress or cracking. | Use torque-limiting tools and follow recommended fastener torque specifications for Nylon to prevent damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure sealing components, Thermal insulation barriers, Wear-resistant fluid handling parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||