This high-grade carbon steel stock sheet is precision-manufactured for critical HVAC applications. Its robust construction and specific dimensions make it an ideal component for robust heating and cooling systems requiring exceptional thermal performance.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.705" |
| Length | 29" |
| Width | 18" |
Built to exacting engineering tolerances, this 0.705-inch thick carbon steel stock sheet measures 29 inches in length and 18 inches in width. Composed of low-carbon steel, it offers excellent weldability and formability, crucial for custom fabrication in HVAC ductwork, plenums, and heat exchanger casings. Its substantial thickness ensures structural integrity and resistance to thermal expansion and contraction cycles common in heating and cooling environments. This material's inherent strength and ability to withstand moderate temperatures make it a cost-effective and reliable choice for demanding industrial and commercial installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against project specifications. 2. Prepare surfaces for welding or fastening according to industry standards. 3. Accurately cut and shape the sheet to conform to the design requirements of the heating or cooling system component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade steel not suited for elevated temperatures. | Always specify and use carbon steel with appropriate certifications for high-temperature HVAC applications. |
| Inadequate surface preparation before welding, leading to weak joints. | Thoroughly clean the carbon steel surfaces of all oils, rust, and contaminants before any welding procedures. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: HVAC Ductwork Fabrication, Plenum Construction, Heat Exchanger Casings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||