This robust carbon steel stock sheet is precision-engineered for critical pulling and lifting operations. Its substantial thickness and dimensions ensure exceptional strength and durability under heavy loads.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.703" |
| Length | 13" |
| Width | 46" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a formidable 0.703" thickness, providing superior structural integrity. Measuring 13" in length and 46" in width, it is manufactured from high-grade carbon steel known for its excellent tensile strength and impact resistance. This material composition allows for reliable performance in high-stress environments. Ideal for fabricating robust components for cranes, hoists, winches, and other heavy-duty pulling and lifting equipment where safety and load-bearing capacity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from contaminants. 2. Position the stock sheet accurately according to the design specifications. 3. Secure the stock sheet using appropriate welding, bolting, or other fastening methods suitable for its intended application and load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners for the load capacity. | Always consult load charts and engineering specifications to select fasteners that exceed the anticipated stress requirements. |
| Inadequate surface preparation prior to welding or fastening, leading to poor adhesion. | Thoroughly clean and degrease the contact surfaces to ensure optimal weld penetration or bolt torque. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of heavy-duty lifting lugs, Construction of structural components for cranes and hoists, Reinforcement plates for industrial winches and towing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||