This premium brass stock sheet, precisely machined to 0.703" thickness, is engineered for demanding pressure and temperature control systems. Its robust brass composition ensures exceptional durability and resistance to corrosion.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.703" |
| Length | 21" |
| Width | 14" |
Manufactured under strict quality controls, this brass stock sheet measures 0.703 inches in thickness, 21 inches in length, and 14 inches in width. Composed of a high-grade brass alloy, it exhibits excellent thermal conductivity, corrosion resistance, and tensile strength suitable for a wide range of pressure and temperature regulation components. Its precise dimensions facilitate seamless integration into custom manifold designs, valve bodies, and heat exchanger fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of any debris or contaminants before use. 2. Accurately mark and cut the sheet to the required dimensions according to your design specifications. 3. Perform necessary machining operations (drilling, tapping, milling) to create mating surfaces and component interfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect cutting tool that can lead to deformation or burring of the brass. | Utilize sharp, appropriate cutting tools designed for non-ferrous metals, such as carbide-tipped blades or end mills, to achieve clean cuts. |
| Inadequate surface preparation prior to joining or assembly, compromising seal integrity. | Thoroughly clean and de-grease all mating surfaces using an appropriate solvent to ensure a proper seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator components, Temperature control valve bodies, Heat exchanger plates, Manifold fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||