This 0.699" thick Nylon stock sheet offers exceptional durability and wear resistance, ideal for robust components in demanding Heating & Cooling environments. Precisely manufactured for reliable performance and extended service life.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.699" |
| Length | 47" |
| Width | 14" |
Trusted by engineers across multiple sectors, this 0.699" thick Nylon stock sheet (47" x 14") is engineered for superior mechanical strength and excellent thermal insulation properties. Its high tensile strength, abrasion resistance, and low coefficient of friction make it ideal for wear pads, seals, and structural components within HVAC systems. The material's inherent chemical resistance also ensures longevity in environments exposed to refrigerants and common industrial lubricants. This stock form allows for precise custom fabrication to meet exact application requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Prepare mating surfaces for optimal adhesion or mechanical fastening. 3. Secure the fabricated Nylon component in place using recommended fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools leading to delamination or poor edge finish. | Employ sharp, industrial-grade cutting tools specifically designed for plastics, such as carbide-tipped saws or routers, to achieve clean cuts. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Use appropriate torque settings for fasteners and consider incorporating washers to distribute pressure evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC System Wear Components, Insulating Bushings and Liners, Custom Seal Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||