This 0.699-inch thick 304 stainless steel stock sheet is engineered for high-performance hydraulic applications, offering exceptional corrosion resistance and structural integrity. Its robust composition ensures reliability in challenging environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.699" |
| Length | 31" |
| Width | 19" |
Manufactured under strict quality controls, this 304 stainless steel sheet boasts a nominal thickness of 0.699 inches, with precise dimensions of 31 inches in length and 19 inches in width. Composed of 18-20% chromium and 8-10% nickel, this austenitic alloy provides superior resistance to a wide range of corrosive media, including many acids and industrial fluids commonly encountered in hydraulic systems. Its non-magnetic nature and excellent formability make it ideal for custom fabrication of hydraulic manifolds, reservoirs, and structural components where hygiene and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or machining area is clean and free of contaminants. 2. Precisely cut the 0.699" 304 stainless steel sheet to the required dimensions using appropriate industrial cutting tools. 3. Deburr all cut edges thoroughly to prevent stress concentration and facilitate subsequent fabrication steps.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components exposed to corrosive fluids. | Always specify 304 stainless steel or a higher-grade alloy for hydraulic components requiring corrosion resistance. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all edges after cutting to prevent micro-cracking and improve the integrity of welded or formed joints. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Reservoir Construction, Custom Hydraulic Component Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||