This high-strength carbon steel stock sheet, measuring 0.697" thick, 45" long, and 41" wide, is engineered for demanding hydraulic applications requiring superior structural integrity and durability.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.697" |
| Length | 45" |
| Width | 41" |
Precision-manufactured to tight tolerances, this 0.697" thick carbon steel stock sheet offers exceptional strength and resilience. Its robust composition makes it ideal for fabricating critical components within high-pressure hydraulic systems, such as manifold blocks, accumulator housings, and structural supports. The material's inherent toughness ensures resistance to deformation and fatigue under extreme operational loads, guaranteeing reliable performance and extended service life in challenging industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project requirements. 2. Fabricate components using appropriate machining and welding techniques suitable for 0.697" carbon steel. 3. Integrate fabricated parts into the hydraulic system, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge steel for high-pressure hydraulic components. | Always specify and utilize steel sheet thickness that meets or exceeds the calculated pressure and structural load requirements for the hydraulic application. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean and prepare the steel surface to remove contaminants that could compromise weld quality or coating adhesion, ensuring long-term performance. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, High-Pressure System Components, Structural Support for Hydraulic Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||