Engineered for robust hydraulic systems, this 0.696-inch thick Nylon stock sheet provides exceptional wear resistance and impact strength. Its precise dimensions (31" x 13") ensure a reliable foundation for critical components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.696" |
| Length | 31" |
| Width | 13" |
A proven choice for industrial professionals, this 0.696" thick Nylon stock sheet (31" x 13") delivers superior performance in high-pressure hydraulic environments. Its inherent toughness, excellent abrasion resistance, and good chemical compatibility make it ideal for seals, wear pads, and structural components. The material's low coefficient of friction minimizes energy loss and prolongs component life, ensuring consistent operational efficiency and reduced maintenance cycles in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Precisely mark and cut the Nylon sheet to the required dimensions using appropriate tooling for thick plastics. 3. Deburr all edges thoroughly to prevent material fatigue and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick Nylon, leading to chipping or cracking. | Employ specialized saws or routers with sharp, carbide-tipped blades designed for machining plastics to ensure clean, precise cuts. |
| Overheating the material during cutting, causing melting and compromising structural integrity. | Utilize adequate cooling methods, such as air jets or coolant, and maintain appropriate cutting speeds to prevent excessive heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wear rings, Pump components and bearings, Manifold blocks and valve components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||