This robust carbon steel stock sheet, measuring 0.695" thick, 45" in length, and 34" in width, is engineered for critical hydraulic system components requiring superior strength and resilience.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.695" |
| Length | 45" |
| Width | 34" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.695 inches, with precise length and width dimensions of 45 inches and 34 inches respectively. Its high tensile strength and yield point make it ideal for fabrication of heavy-duty hydraulic manifolds, pressure vessels, and structural supports within demanding industrial environments. The material's inherent machinability and weldability ensure ease of integration into complex hydraulic assemblies, providing long-term operational integrity under extreme pressure and stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to fabrication. 2. Employ appropriate cutting and machining techniques suitable for 0.695" carbon steel. 3. Ensure proper welding procedures are followed for robust joint construction in hydraulic applications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength steel for hydraulic components. | Always select stock sheet material that meets or exceeds the specified pressure and structural requirements for the intended hydraulic application. |
| Inadequate pre-fabrication inspection of sheet material. | Thoroughly inspect the carbon steel stock sheet for any surface defects, dimensional inaccuracies, or material inconsistencies before commencing any fabrication. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, High-Pressure Vessel Construction, Heavy-Duty Hydraulic Support Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||