This robust carbon steel stock sheet is engineered for heavy-duty pulling and lifting operations. Its substantial thickness and premium material composition ensure exceptional strength and reliability under extreme stress.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.688" |
| Length | 45" |
| Width | 20" |
Built to exacting engineering tolerances, this carbon steel stock sheet boasts a nominal thickness of 0.688 inches, a length of 45 inches, and a width of 20 inches. Constructed from high-grade carbon steel, it exhibits excellent tensile strength and yield strength, making it ideal for applications requiring significant load-bearing capacity. Its inherent toughness and resistance to deformation ensure consistent performance in demanding industrial environments. Surface finish is typically mill-certified for immediate fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before fabrication. 2. Prepare edges according to fabrication drawings for welding or fastening. 3. Integrate into the lifting or pulling apparatus following established engineering best practices and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel instead of certified carbon steel for critical load-bearing components. | Always specify and use certified carbon steel stock meeting relevant industrial standards for pulling and lifting applications. |
| Inadequate edge preparation leading to compromised weld strength. | Ensure proper beveling and cleaning of edges prior to welding to achieve full joint penetration and maximum weld integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch components, Crane structural elements, Industrial towing apparatus.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||