Engineered for extreme operational demands, this 0.684" thick polycarbonate stock sheet provides exceptional strength and impact resilience for critical pulling and lifting tasks.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.684" |
| Length | 19" |
| Width | 18" |
Purpose-built for heavy-duty applications, this 0.684" thick polycarbonate stock sheet offers superior impact resistance and a high strength-to-weight ratio, crucial for demanding pulling and lifting environments. Its robust composition ensures longevity under significant stress, preventing catastrophic failure. The dimensions of 19" x 18" provide ample surface area for custom fabrication of specialized lifting components, protective guards, or reinforcement plates where reliability and durability are paramount. Polycarbonate's inherent toughness makes it an ideal alternative to traditional materials in high-impact scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Precisely align the polycarbonate sheet according to design specifications. 3. Securely fasten the sheet using appropriate hardware, avoiding over-tightening to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too small or not rated for the load. | Utilize heavy-duty, appropriately sized fasteners that are engineered to handle the expected tensile and shear loads. |
| Drilling holes too close to the edge, compromising structural integrity. | Maintain adequate edge distance when drilling holes, following recommended guidelines for polycarbonate to prevent cracking or delamination. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom lifting fixture fabrication, Reinforcement plates for heavy equipment, Protective shields for dynamic load points.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||