This robust polycarbonate stock sheet offers superior impact resistance and clarity, making it ideal for demanding plumbing and janitorial environments. Its tough material ensures long-term durability and protection.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.682" |
| Length | 18" |
| Width | 43" |
Engineered for reliability and performance, this 0.682-inch thick polycarbonate sheet is manufactured to exacting standards for industrial use. Measuring 18 inches in length and 43 inches in width, its exceptional impact strength and chemical resistance make it a prime choice for protective barriers, enclosures, and custom fabrication within plumbing and janitorial sectors. Polycarbonate's inherent durability ensures it withstands harsh cleaning agents and physical stress, providing a reliable solution for safeguarding sensitive equipment or personnel.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Mark and drill appropriate pilot holes for fasteners, considering the expansion of polycarbonate. 3. Secure the sheet using properly sized washers and fasteners, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without washers. | Always use appropriately sized washers to distribute pressure and prevent stress concentration on the polycarbonate. |
| Drilling holes too close to the edge. | Maintain adequate edge distance when drilling to avoid delamination or cracking, typically a minimum of 2x the sheet thickness. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shielding for chemical storage areas, Splash guards for high-traffic janitorial stations, Custom fabricated enclosures for plumbing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||