This high-strength 0.677-inch thick carbon steel stock sheet is engineered for demanding hydraulic system components. Its robust construction ensures reliability and longevity in high-pressure environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.677" |
| Length | 40" |
| Width | 34" |
Trusted by engineers across multiple sectors, this 0.677" thick carbon steel stock sheet offers exceptional structural integrity for critical hydraulic applications. Measuring 40" in length and 34" in width, its material properties provide superior tensile strength and yield point, essential for pressure vessels, manifold blocks, and structural supports within hydraulic systems. The consistent thickness and precise dimensions ensure predictable performance and ease of machining for complex geometric designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design requirements. 2. Prepare surfaces for fabrication according to industry standards. 3. Fabricate components using appropriate machining and welding processes for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel for high-pressure hydraulic applications. | Always select materials with documented tensile strength and yield point specifications suitable for the intended operating pressures. |
| Inadequate surface preparation leading to premature failure. | Ensure all surfaces are properly cleaned, degreased, and free from contaminants before fabrication and assembly. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold blocks, Pressure vessel fabrication, High-strength structural supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||