This high-strength carbon steel stock sheet, measuring 0.658" x 18" x 37", is engineered for superior performance in rigorous pulling and lifting applications. Its robust construction ensures reliability and longevity in demanding industrial settings.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.658" |
| Length | 18" |
| Width | 37" |
Designed for demanding industrial environments, this carbon steel stock sheet boasts a substantial 0.658-inch thickness, providing exceptional structural integrity and load-bearing capacity. Manufactured from high-quality carbon steel, it offers excellent tensile strength and resistance to deformation under extreme stress. Ideal for fabricating custom lifting slings, heavy-duty rigging components, and robust pulling mechanisms. Its generous 18-inch width and 37-inch length allow for versatile fabrication and adaptation to a wide range of project requirements. This material is specifically selected for its proven performance in applications where safety and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any contaminants or surface defects. 2. Accurately measure and mark cut lines according to fabrication drawings. 3. Utilize appropriate cutting tools (e.g., plasma cutter, abrasive saw) for precise material removal. Ensure proper safety precautions are observed during cutting operations. 4. Prepare edges for welding or fastening as required by the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or weaker material for critical load-bearing components. | Always verify that the material specifications, including thickness and tensile strength, meet or exceed the calculated load requirements for the intended application. |
| Improper edge preparation before welding, leading to weak or faulty joints. | Ensure all edges are clean, de-burred, and properly beveled according to welding procedure specifications to achieve optimal weld penetration and strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom fabrication of heavy-duty lifting slings, Construction of robust rigging hardware, Manufacturing of industrial pulling equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||