This high-strength carbon steel stock sheet is engineered for demanding hydraulic applications. Its robust construction and precise dimensions ensure reliable performance and longevity in critical systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.657" |
| Length | 20" |
| Width | 29" |
Precision-manufactured to tight tolerances, this 0.657" thick carbon steel stock sheet offers exceptional dimensional stability and mechanical integrity. The material's inherent strength and rigidity make it ideal for components subjected to high pressures and stresses within hydraulic systems. Its chemical composition ensures excellent weldability and machinability, facilitating integration into complex assemblies. The 20" x 29" dimensions provide ample material for fabrication of custom hydraulic manifold blocks, cylinder components, and structural supports.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material specifications against project requirements. 2. Prepare edges for welding or machining according to fabrication drawings. 3. Install fabricated components into the hydraulic system, ensuring proper sealing and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not suited for hydraulic pressures. | Always specify and verify that the carbon steel meets the required mechanical properties and is rated for the intended hydraulic system pressures. |
| Inadequate surface preparation before welding. | Thoroughly clean the carbon steel surfaces of any rust, oil, or mill scale to ensure strong and defect-free welds. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold blocks, Cylinder end caps and bases, Hydraulic system structural supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||