This 0.655-inch thick carbon steel stock sheet is engineered for extreme durability and load-bearing capacity. Its robust construction makes it ideal for demanding pulling and lifting operations where strength is paramount.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.655" |
| Length | 24" |
| Width | 24" |
Engineered for reliability and performance, this 24" x 24" carbon steel stock sheet boasts a substantial 0.655" thickness, providing exceptional tensile strength and rigidity. Manufactured from high-grade carbon steel, it exhibits excellent resistance to deformation under heavy loads, making it suitable for critical components in winches, hoists, and heavy machinery. The material's inherent toughness ensures longevity in abrasive environments and under constant stress. Its precise dimensions facilitate seamless integration into complex assemblies, ensuring structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and capable of supporting the intended load. 2. Position the carbon steel stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate high-strength fasteners (e.g., Grade 8 bolts and nuts) with proper torque values.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use high-strength, appropriately sized fasteners (e.g., Grade 8 or higher) and torque them to manufacturer specifications to ensure secure mounting and prevent failure. |
| Mounting on an uneven or weak surface. | Verify the mounting surface is perfectly level and structurally sound to distribute the load evenly and prevent stress concentrations on the sheet. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Winch base plates, Heavy-duty lifting bracket fabrication, Reinforcement plates for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||