This robust 0.651-inch thick carbon steel stock sheet, measuring 33 inches by 34 inches, is specifically designed for the rigors of hydraulic systems. It offers exceptional strength and durability for critical components.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.651" |
| Length | 33" |
| Width | 34" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.651" thickness, providing superior structural integrity for high-pressure hydraulic environments. Its robust 33" x 34" dimensions offer ample material for fabricating custom hydraulic manifolds, accumulator housings, and structural support elements within complex fluid power systems. The inherent strength and workability of carbon steel ensure resistance to deformation under extreme loads and operational stresses, making it an ideal choice for applications demanding consistent performance and extended service life. This material is selected for its balance of mechanical properties and cost-effectiveness in demanding hydraulic engineering.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity before cutting. 2. Precisely cut to desired component specifications using appropriate tooling. 3. Smooth all edges and deburr thoroughly prior to assembly into hydraulic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge finishing leading to stress risers. | Thoroughly deburr and radius all cut edges to prevent premature fatigue failure. |
| Using incorrect cutting methods that induce excessive heat or deformation. | Employ precision cutting techniques such as waterjet, laser, or abrasive sawing to maintain material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Accumulator Housing Construction, Structural Components for Hydraulic Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||