This robust brass stock sheet is engineered for heavy-duty pulling and lifting applications. Its substantial thickness and premium brass composition ensure exceptional durability and reliability in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.650" |
| Length | 16" |
| Width | 43" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.650 inches, a length of 16 inches, and a width of 43 inches. Fabricated from high-grade brass, it offers excellent tensile strength and superior resistance to corrosion and wear, making it ideal for applications requiring robust material integrity and longevity under significant load. Its non-sparking properties are also a key consideration in hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of contaminants. 2. Precisely align the brass stock sheet with the intended mounting points. 3. Securely fasten the sheet using appropriate industrial-grade fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that may lead to premature failure under load. | Always utilize fasteners with a tensile strength rating that exceeds the maximum anticipated load on the brass sheet. |
| Not considering the environment; using standard brass where a specialized alloy might be required for extreme corrosion resistance. | Consult material data sheets and application requirements to confirm standard brass is suitable or if a specific alloy is needed. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Specialized lifting equipment fabrication, Industrial material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||