This robust nylon stock sheet, measuring 0.649" thick, is engineered for demanding industrial environments. Its exceptional durability and wear resistance make it ideal for a wide range of heavy-duty applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.649" |
| Length | 24" |
| Width | 38" |
Purpose-built for heavy-duty applications, this 0.649" thick nylon stock sheet offers superior mechanical strength and wear resistance. Its dimensions of 24" x 38" provide ample material for fabrication. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and a low coefficient of friction, make it an ideal choice for components subjected to constant stress and friction. It exhibits good chemical resistance to many oils, greases, and solvents, further enhancing its utility in industrial settings. Ideal for custom fabrication of gears, bearings, wear pads, and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Accurately measure and cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the nylon sheet using industry-standard mechanical fasteners or adhesives suitable for nylon and the mating material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to material chipping or cracking. | Utilize high-speed steel or carbide-tipped cutting tools specifically designed for machining plastics, ensuring proper feed rates and cooling. |
| Over-tightening fasteners, causing stress concentrations and potential delamination. | Employ torque-limiting tools and use washers to distribute pressure evenly across the fastener points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Gears and Sprockets, Chute Liners, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||