This robust 0.643-inch thick Nylon stock sheet, measuring 23 inches by 31 inches, is engineered for demanding hydraulic applications. Its exceptional toughness and wear resistance ensure reliable performance in high-pressure environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.643" |
| Length | 23" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 0.643" thick Nylon stock sheet offers superior dimensional stability and consistent performance critical for hydraulic systems. The material's inherent toughness, excellent abrasion resistance, and low coefficient of friction make it ideal for wear pads, seals, and other components subjected to significant mechanical stress and fluid contact. Its chemical resistance further enhances its suitability for diverse hydraulic fluid environments, ensuring longevity and operational integrity. Dimensions: 0.643" (Thickness) x 23" (Length) x 31" (Width).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Install the fabricated component according to system design specifications, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, specialized cutting tools (e.g., carbide-tipped blades) with appropriate feed rates and cooling to achieve clean cuts. |
| Over-tightening fasteners, which can cause stress concentrations and premature failure in the Nylon. | Employ appropriate torque specifications for all fasteners, considering Nylon's slightly elastic nature. Use washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Wear Rings, Seals and Gaskets, Bushings and Bearings, Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||