Engineered for robust hydraulic systems, this 0.634-inch thick carbon steel stock sheet offers exceptional strength and durability. Its precise dimensions ensure seamless integration into critical hydraulic components.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.634" |
| Length | 21" |
| Width | 14" |
A proven choice for industrial professionals, this carbon steel stock sheet boasts a substantial 0.634" thickness, providing the structural integrity essential for high-pressure hydraulic applications. Measuring 21" in length and 14" in width, this material is precisely manufactured to meet stringent industry standards. Its inherent tensile strength and resistance to deformation make it ideal for fabricating critical hydraulic components such as manifold blocks, cylinder bases, and structural supports. The consistent material properties ensure predictable performance and longevity under demanding operational conditions. Rigorous quality control guarantees uniformity and dimensional accuracy.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is properly cleaned and free from any contaminants. 2. Precisely cut or machine the sheet to the required dimensions for the specific hydraulic component. 3. Fabricate the component utilizing appropriate welding, machining, or forming techniques suitable for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner material for high-pressure hydraulic applications. | Always verify the required material thickness based on pressure ratings and stress calculations for the specific hydraulic system. |
| Inadequate surface preparation before fabrication. | Thoroughly degrease and clean the carbon steel surface to ensure proper adhesion of coatings or seals and prevent weld defects. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Cylinder End Caps and Bases, Hydraulic System Structural Supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||