This premium brass stock sheet offers exceptional durability and corrosion resistance, making it ideal for fabricating critical hydraulic components. Its precise dimensions ensure reliable performance in demanding fluid power systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.629" |
| Length | 19" |
| Width | 15" |
Built to exacting engineering tolerances, this 0.629-inch thick brass stock sheet measures 19 inches in length and 15 inches in width. Composed of a high-copper alloy, it exhibits excellent machinability, formability, and superior resistance to a wide range of hydraulic fluids and common industrial environments. The material's inherent strength and low magnetic permeability make it an optimal choice for hydraulic manifolds, fittings, valve bodies, and other components where fluid containment and pressure integrity are paramount. Its thermal conductivity also aids in heat dissipation within hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely cut the brass stock to the required dimensions for your component. 3. Machine or form the cut material according to the design specifications for your hydraulic part.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong cutting tool, leading to burrs and inaccurate edges. | Employ sharp, appropriate cutting tools specifically designed for brass to ensure clean cuts and precise dimensions. |
| Inadequate surface preparation before machining or forming. | Thoroughly clean the brass surface to remove any contaminants that could affect machining quality or adhesion in subsequent processes. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold fabrication, Custom hydraulic fitting production, Valve body construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||